Who it is for
The AQDB2 is a half-body safety harness for work at height — electrical maintenance, facade work, tower access and general site work where the wearer needs a wide padded waist belt and two hands free. It carries three steel load-bearing D-rings, 44 mm webbing rated at 22 kN, and covers an 80-145 cm waist with a 52-76 cm leg size.
Product details
- Attachment points: 3 steel load-bearing D-rings; one work positioning point on each side of the waist.
- Buckles and adjustment: Standard Easy-Lock buckles let the webbing length be adjusted smoothly.
- Comfort: Wide waist belt with generous padding for optimum comfort during work at height.
- Corrosion protection: All steel components are electrophoretically coated for higher corrosion resistance.
Specifications
| Material | High-strength polyester |
|---|---|
| Strength | 22 kN |
| Weight | 1060 g |
| Waist size | 80-145 cm |
| Leg size | 52-76 cm |
| Attachment points | 3 steel D-rings (load-bearing) |
| Webbing width | 44 mm ±1 mm |
| Webbing thickness | 1.3-1.5 mm (customisable up to 2 mm) |
Standards & test reports
This model is built to EN 358 — Work positioning systems — belts and lanyards for restraining the wearer at the work position.
Test reports and conformity documentation are available by model on request. Ask your contact which documentation is held for this specific model before you place it in an import file.
Where it is used
- Electrical maintenance on poles and pylons, where the side D-rings take a positioning lanyard
- Facade and window work with a wide padded waist belt for long shifts
- Tower and mast access — two hands free once the positioning lanyard is set
- General site work needing a work-positioning belt with rebar or tool attachment
Frequently asked questions
What is the difference between AQDB2, AQDB3 and AQDB4?
All three are half-body work-positioning harnesses with the same waist and leg sizing. AQDB2 carries three steel D-rings, AQDB3 one steel D-ring, and AQDB4 one aluminium D-ring for lower weight (915 g).
Does this harness arrest a fall on its own?
No. A half-body harness is a work-positioning device. For fall arrest you need a full-body harness to EN 361 combined with a lanyard and absorber, or a fall arrester.
What waist and leg size does it cover?
Waist 80–145 cm, leg 52–76 cm — one size covers most wearers.
How often should it be inspected?
Before every use by the wearer, and formally at least every 12 months by a competent person. Records should be kept for the life of the harness.

















